FOX 38 Factory 29-inch w/Grip 2

** Please note, just as with our super sale Fox Shocks, the 160mm forks have been converted from 180mm to 160mm. Our pro suspension techs take the time to install the 160mm air-spring with the utmost care. Note that 160mm and 180mm chassis are identical**

FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability.

- The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs
- Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality
- The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release
- Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping
- Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button
- The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding

** If you register this fork with fox, it will come up as a 180mm. Being that a 160mm air-spring was installed, you may wonder if that could cause warranty issues. But fear not! You will not have issues with warranty nor registration of the fork through FOX. As with the Shocks, fox gives us their blessing**