Skip to main content

Filter By:

Hubs

DT Swiss 240 Classic EXP MTB Rear Hub
$477.80
Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.
Stan's NoTubes 3.30 Shimano/SRAM Freehub Body (9/10-speed)
$74.00
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
Stan's NoTubes 3.30/3.30Ti 12mm Rear Thru-Axle Conversion Kit
$34.00
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
Stan's NoTubes 3.30/3.30Ti QR Hub Kit
$22.00
Stan's 3.30/3.30Ti 9mm Hub Kit makes Stan's 3.30 front hubs compatible with a standard quick-release. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes 3.30/3.30Ti Rear Hub End Caps for XD Driver
$17.50
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
Stan's NoTubes 3.30/3.30Ti Shimano/SRAM Steel Freehub Body (9/10-speed)
$74.00
Replacement Shimano/SRAM steel freehub body for Stan's NoTubes 3.30 disc or HD disc rear hubs.
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Spank HEX Drive Microspline Freehub
$129.99
Alloy Shimano Micro Spline Freehub Body for HEX rear hubs. - Compatibility: HEX J-TYPE/HEX STRAIGHT-PULL Rear Hubs - Includes: Spacer ring, conversion spacer, and 3 bearings - Material: alloy - Weight: 108g
Spank HEX J-Type R148 Rear Hub
$249.99
- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination
SRAM 506 Front Hub
$30.00
SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.
SRAM MTH 716 Front Hub
$69.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.
SRAM MTH 746 Rear Hub
$92.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
Race Face Trace Front Hub
$89.99
- eMTB rated with steel axles - 6902 cartridge bearings and robust 10 degree engagement - 32h spoke count - For J-Bend spokes only
Race Face Trace Rear Hub
$219.99
- eMTB rated with steel axles - 6902 cartridge bearings and robust 10-degree engagement - 32h spoke count - For J-Bend spokes only
Race Face Vault Front Hub
$219.99
- An oversized hub shell increases torsional and lateral stiffness - 6902 bearings for maximum durability - Wide bearing placement was designed to decrease load on the bearings - Low-drag labyrinth seals - Tool-free endcaps - Torque-cap compatible - Includes standard 15mm end-caps only, Torque must be purchased separately
Page 1 of 1