Filter By:
Stems
$66.00
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
$59.99
$60.00
On Sale
The new Trail stem is forged and CNC-machined to meet the demands of today's trail riding with a sublime stiffness-to-weight ratio.
- 3D-forged and CNC-machined 6061 alloy construction
- 4-bolt oversized 31.8mm handlebar interface with relieved faceplate
- Compatible with carbon composite handlebars
$99.99
- Highly weight optimized single crown stem for use with 35mm handlebars
- Dial your fit with micro increment size options, tuned to fit any rider size and style
- Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep
- Ultra-short stack height and true zero-degree rise
- Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars
- Recommended for: ASTM 5, All mountain, enduro, trail, free ride, E-Bike
Specs:
- Key Technologies: MGR Alloy, chamfered bar clamp, top-cap included
- Material: 6-Series Alloy, 3D forged CNC optimized body
- Rise (°): 0
- Diameter: 35mm
- Stack height: 34mm
- Weight: ±131g (35mm) / ±136g (40mm) ±139g (45mm) ±141g (50mm)
- Finish: Shotpeen anodized
$69.99
- Strong yet competitively lightweight alloy single crown stem for all disciplines
- Unique style, modern geometry, and rock-solid construction, without the heavy price tag
- Dial your fit with micro-increment size options, tuned to fit any rider size and style
- Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep
- Ultra-short stack height and true zero-degree rise
- Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars
$69.99
- Strong yet competitively lightweight alloy single crown stem for all disciplines
- Unique style, modern geometry, and rock-solid construction, without the heavy price tag
- Dial your fit with micro-increment size options, tuned to fit any rider size and style
- Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep
- Ultra-short stack height and true zero-degree rise
- Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars
- Recommended for: ASTM 5, All mountain, enduro, trail, free ride, DJ, E-Bike
$64.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
$35.00
Race Face's Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point.
- Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight
- Four bolt bar clamp holds bar securely in position
- Machined logo on bar clamp
$104.99 - $109.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength.
- CNC Aluminum
- 0-degree rise for perfect fit on aggressive bike frames
- Extensive CNC machining for weight reduction without impacting strength
- TopLock faceplate design for easy and secure installation
$64.00
The redesigned Range is lightweight, tech-ready, and sized for the modern rider.
Now, let's dig into what makes this stem-fabulous. With a 3D forged alloy body, this stem is light with a large faceplate for a more secure clamping surface. For the tech nerd in all of us, it also has a GoPro/headlight mount. Because, if you don't get that footie, did it really happen? Plus, with the headlight mount, a world of nighttime adventures opens up. We sized this stem at 40mm and 50mm because we believe those options work best with modern bike geos and provide the right amount of space in the cockpit. Get excited about upgrading your stem this biking season...you know you want to.
Features:
- Weights: 40mm - 174g / 50mm - 210g
- For 31.8mm handlebars
- GoPro/headlight mount
- Fits 1-1/8" steerer tube
- Stack height: 38mm
- 3-year warranty!
$89.99
Joining our Carbon Handlebar is the OneUp Stem. Designed for everything from trail riding to Enduro racing.
The OneUp Stem can be used with a regular star nut and top cap like every other stem. It’s also compatible with existing threaded EDC top caps, for people who’ve already threaded their steerer tube.
SPECS
- Length: 35mm (155g) 50mm (173g) / 35mm Dia. / 0° Rise
- Colour: Black.
- Stack Height: 39mm
- Bar Clamp Width: 55mm
- Material: 6061-T6 Aluminum
$155.00
Industry Nine’s A-Series mountain bike stems are crafted from domestically-sourced 7075 aluminum billet into a svelte design achieving a nexus of form and function. Using advanced manufacturing techniques honed over decades in our CNC machine shop, we continue our proud tradition of offering riders uncompromising components.
Taking name and shape from the A-axis in our five-axis machining centers, the A35 and A318 are destined for your favorite all-mountain rides. The A35 and A318 utilize either a 35mm or 31.8mm handlebar clamp diameter providing 180 degrees of contact on the stem body for twist-free security that will play nice with both alloy and carbon bars. Stainless steel hardware ensures everything stays in place and looks great, regardless of mud-blasting washes or rainforest climates.
Every A-Series stem is machined, anodized and assembled entirely in our Asheville, NC facility and available in a variety of lengths geared for modern trail bike geometry. Add our expressive mix of 11 anodized colors, and you’ve arrived at the intersection of execution and desire.
$37.99
- 3D forged alloy construction
- Fits 1-1/8-inch (28.6mm) steerer forks
- Fits 31.8mm handlebar clamp
- Heat treated hardware
- Weight: 152g (100mm)
- 3D forged alloy construction
- Fits 1-1/8-inch (28.6mm) steerer forks
- Fits 25.4mm handlebar clamp
- M6 Black hardware
- Weight: 161g (110mm)
$94.99
The Cavity stem was developed with pain staking focus on strength, function and attention to detail. Tapered body for cleaner lines and weight reduction, multiple internal and external machining processes to reduce every gram possible and chamfered edges throughout for stunning detail.
$104.99
Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem.
- Designed for all applications from All MTN to Slopestyle and anything in between
- CNC Machined from a solid block of 6061 T6 Aluminum
- Exceptionally detailed chamfered edges and channels throughout
- 55mm wide clamping platform
Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem.
- Designed for all applications from All MTN to Slopestyle and anything in between
- CNC Machined from a solid block of 6061 T6 Aluminum
- Exceptionally detailed chamfered edges and channels throughout
- 55mm wide clamping platform
$119.99
- CNC Machined from hard high grade 7075 T73 Aluminum
- 0 deg rise to keep you low and in control
- 69mm wide clamping platform for an incredibly stiff front end
- Intended Use: Downhill
Chromag's BZA 35 stem is strong, light, and burly. Featuring a 35mm bar/stem interface and weighing a perfect 165 grams this stem is light yet extremely stiff for positive control. - CNC profiling - Weight: 165g (50mm length)
$95.00
Chromag's HiFi stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 200 grams - Low stack height
$100.00
Chromag's HiFi V2 stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 175 grams (35mm length) - Low stack height
$125.39
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider's demands for precision and for those moments when you have to be inch-perfect.
Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem.
We developed the Stem specifically with Pro's and Bro's alike. It was obvious we all live for the same challenge of pushing our own limits. As riders, we want a Stem that inspires confidence to change lines through the middle of a rock garden like it's no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear-to-ear grins and saying to your mates at the bottom of a trail, "Did you see that?".
From the start of the design process, it became clear that we wanted extra rigidity. To yield this, we would need to make the Stem using a forging process - a new thing for us. The result of this allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.
Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We've vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product, it's fully CNC machined and anodized in all your favourite flavours.
Tested with the world's fastest jibbers and sendiest racers, this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender.
- Forged and Fully CNC machined from AL6061 – T6 Aluminium
- Stainless Steel Hardware
- Available lengths - 35mm, 42.5mm and 50mm
- Available in both 31.8mm (Black only) and 35mm Clamp
- Weight: 35mm 138g, 42.5mm 152g, 50mm 160g
$60.00
3D-forged and CNC-machined from 6061 aluminum the Future Stem Comp is optimized for use with all Future Shocks. It's also compatible with our Specialized accessory mount for seamless integration.
- 3D-forged and CNC-machined, 6061 aluminum, Future Shock-optimized stem.
- Available in 6-degree angles and 60, 70, 80, 90, 100, 110, and 120mm lengths.
- Compatible with the Specialized accessory mount.
$125.00
The Alpinist Stem is a light and stiff alloy stem. Designed to perform during big attacks in the hills and furious bunch sprints, while weighing just 110g for featherweight performance when the road goes up. With classic lines, traditional clamp, and huge range of lengths and rise angles, this stem earns the Alpinist name as the ideal upgrade to almost any bike.
LIGHT: Every Alpinist product puts a premium on lightweight, because we know lightweight is a key ingredient to creating magical ride quality. Using premium 7075 Alloy and Ti hardware, the Alpinist stem weighs a feathery 110grams in a 110mm length.
STIFF: 3D Forged and CNC machined, despite its feathery weight the Alpinist stem delivers the stiffness needed for big power and precise, sharp handling in the most challenging situations.
FIT: With seven lengths to choose from, and three different angles of rise, you know you'll find your perfect fit with the Alpinist Stem. Its classic lines, polished black finish, and traditional 31.8mm clamp make it an aesthetic fit with almost any bike.
- Material: 3D-forged and CNC-machined, 7075 aluminum
- Bolts: Titanium
- Lengths: 70, 80, 90, 100, 110, 120, 130mm
- Rise: 6, 12, or 17-degree rise
- Weight: 110-115g (for 110mm)
- Clamp Diameter: 31.8mm
- Clamp Height: 40mm
- Steerer Tube: 1-1/8"
$125.00
The Control Stem is tailor-made with a 35mm clamp to partner with the Control SL bar, delivering more stiffness and more control—coming in at an incredibly light 100g (50mm). Turns out, you can have it all.
LIGHT: Where light weight and stiffness meet. Its high-quality 7075 Alloy and Ti hardware and featherweight function make the Control SL Stem a perfect match for race-day setups.
STIFF: Made with the same integrity as the suite of stiff Roval components, the Control SL provides race-ready rigidity allowing for precision on the bike.
FIT: With six lengths to choose from and 6 degrees of rise, you know you'll find your perfect fit.
- Material: 3D-forged and CNC-machined, 7075 aluminum
- Bolts: Titanium
- Length: 50mm, 60mm, 70mm, 80mm, 90mm, 100mm
- Rise: 6 degree rise
- Weight: 100g (at 50mm), 130g (at 100mm)
- Clamp Diameter: 35mm
- Clamp Height: 40mm
- Steerer Tube: 1-1/8"
$125.00
Making its debut on the all-new Roubaix the S-Works Future stem is the stiff lightweight upgrade that your Roubaix has been waiting for. It's compatible with all Future Shocks and our Specialized accessory mount and its sleek design will create a seamless integration.
- Sleek & seamless integration with all Future Shocks.
- Supremely stiff for responsive handling and feel.
- Compatible with the Specialized accesory mount.
- 6-degree rise
- Length options: 70-140mm
- Approximate weight: 145g (100mm)
$125.00
Lean and clean. The lightweight and stiff S-Works Tarmac Stem features integrated cable routing for Tarmac SL7 models to clean up the cockpit without complicating the bike build.
- Compatible with Tarmac integrated cockpit.
- Integrated face-plate computer mount.
- 80-140mm length options.
- 6 and 12 degree rise options.
- Approx. weight: 155g (100mm)
Page 1 of 1