Filter By:
- Parts & Accessories (78)
- Pedals (223)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Pedals

$17.10
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

$59.99
$80.00
25% Off
With loads of traction, sure-footedness, and premium control, Specialized's Bennies Platform Pedals are ready for everything from freeride madness to trail riding. They're made of a rugged, yet lightweight concave aluminum body with 24 replaceable pins for maximum grip. Durable chromoly axles and sealed cartridge bearings mean they're built to last.
- 430 grams (pair)
- Width x Length: 100 x 105mm
- Thickness: 17.30mm in the center/19mm at each end

$8.99
Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals.
- Provide durability and improved safety
- Mix and match with the longer stock pins to customize your ideal amount of grip

$125.00
- Large pedal platform
- Lower platform height for pedaling stability
- Robust retention claws provide smooth engagement and release
- Customize the entry and release tension settings
- Strong, durable chrome-moly spindle with 8 mm hex wrench mount
- Sealed mechanism
- SM-SH51 Cleat included
- 1.0 mm cleat spacer included
- Binding: Dual sided
- Cartridge axle
- Cleat retention adjuster
- Average weight: 342g
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)

$190.00
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide.
BETTER MUD CLEARANCE
- Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence.
ADDED EFFICIENCY + DURABILITY
- Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center.
LARGER CONTACT AREA
- The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy.
BETTER MUD CLEARANCE
- Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

$19.00
Reliable and Durable 2-Bolt Cleat
Small details make a big difference—especially when it comes to mountain biking. Worn-out cleats can lead to poor pedal function including premature or stubborn release. But swap on a new set of Shimano SM-SH51 Cleats and you know they're purpose-built to work seamlessly with nearly all Shimano SPD Pedals, delivering long-lasting performance thanks to their heat treated forged steel construction that will stand up to even the harshest riding conditions.
Features:
- Shimano SM-SH51 SPD Cleats come stock with all Shimano SPD pedals and are the go-to choice for mountain bikers, indoor cyclists, and anyone looking for a durable and reliable 2-bolt cleat.
- Customizable: Engineered specifically to work with nearly all Shimano SPD pedals, which allow you to micro-adjust the spring force required to clip in and out of your pedals
- Secure Engagement: Deliver 4 degrees of float, which assures just the right amount of movement while also providing a secure connection to your bike
- Ease of Disengagement: Feature a 13-degree clip-out angle, allowing you to quickly get out of your pedals when the need arises
- Built to Last: Made from heat treated forged steel that delivers durable long-lasting performance even under the most severe riding conditions
PREDICTABLE ENGAGEMENT
With 4 degrees of float, Shimano SM-SH51 Cleats permit just the right amount of movement for critical on-the-fly weight shifts while still delivering the secure cleat-pedal engagement needed to confidently tackle technical terrain.
USER FRIENDLY
Shimano SM-SH51 Cleats are compatible with nearly all Shimano SPD pedals, which allow you to micro-adjust how hard or easy it is to clip in and out, providing an unmatched level of customization. These cleats also feature a 13-degree clip-out angle, meaning with the simple outward twist of your heel you can quickly get out of your pedals when the need arises.

$179.99
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide.
BETTER MUD CLEARANCE
- Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence.
ADDED EFFICIENCY + DURABILITY
- Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center.
BETTER MUD CLEARANCE
- Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

$179.99
Low And Lean
Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on.
Round And Round We Go
Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable.
Ride Don't Slide
Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck.
Look Good Ride Good
Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like.
Pedal Envy
More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods.
Specs:
- Axle Material: Chromoly Steel
- Body Material: 6061 Aluminum
- Material: 6061 Aluminum
- Platform Height (MM):14.5
- # of Pins: 20 SHCS hex traction pins per pedal (10 per side)
- Platform L x W (MM): 114 x 101
- Weight: 355g

$144.50 - $169.50
The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs.
Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More.
When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy.
FEATURES
- 10 rear loading custom hexagonal removable pins per side for maximum grip
- Ultra thin leading edge chamfered design to deflect off any obstacle
- Fully sealed and serviceable design with built in bearing extractor
- Wide platform design for increased stability
- Contoured shape provides ultimate connected feel
SPECS
- Weight: 365g
- Platform Size: 115x105mm
- # of Pins: 10 per side
- Axle Material: Chromoly steel
- Height: 8.3-12mm
- Pin to Axle distance: 112mm
- Color: Black, Green, Grey, Blue, Orange, Red, Purple, OilSlick
- Body Material: 6061-T6 Aluminum
COMPATIBILITY
- Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks.
- These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.

$59.99
The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle.
FEATURES
- 10 rear loading Steel pins / side, with Nyloc nuts
- DU plus cartridge bearing axle system
- Thin leading edge chamfered design to deflect off obstacles
- Wide platform design for increased stability
- Contoured shape provides ultimate connected feel
SPECS
- Weight: 355g
- Platform Size: 115x105mm
- # of Pins: 10 per side
- Axle Material: Black chromoly steel
- Height: 18.5mm (13.3 at the leading edge)
- Pin to Axle distance: 108mm
- Color: Stealth Black, Red, Blue, Orange
- Body Material: Nylon Composite

$9.99
Dimension Junior Pedals.
- Molded nylon, 1-piece, caged-type pedals
- Built-in reflectors, will not accept toe clips
- Overall pedal size is 80 x 60mm
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Platform
- Spindle Material: Chromoly Steel
- Weight: 230g (9/16-inch); 304g (1/2-inch)

$54.99 - $59.99
The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

$179.99
TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.

$179.99
TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.

$149.95
This set of pedals aims to provide a large platform, thin profile, durability, tune-ability and serviceability. Ideal for anything from all-mountain, to downhill, to snow.
- 105x115mm pedal body
- 17mm concave foot bed
- Extruded 6061 aluminum body and 4140 chromoly steel axles
- High-load DU bushing and cartridge bearing
- 11 pins per side and 7 of which can be flipped to fit short- or long-way to fine tune the amount of grip desired
- 9/16"

$179.99
Competition-oriented and customizable for refined fit, feel, and power transfer.
Details
- Durable alloy body
- Durable cast steel wings
- Integrated traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- Hex alloy endcap and bashguard
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
Specs
- Body Material: 6061-T6 aluminum
- Cleats: Premium brass cleats with shims included
- Endcap: Hex alloy
- Inner Bearing Type: Igus LL-glide bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Enduro cartridge bearing
- Q-factor: 52mm
- Release Angle: 15° / 20°
- Spindle Material: Forged scm 435 chromoly steel
- Spring Material: 300 series stainless steel
- Warranty: 5 years
- Weight: 320g per pair
- Wing Material: 17-4PH stainless

$26.99
Cleats with a more forgiving 10-deg release.
- Optimized for novice riders or those new to clip-in pedals
- 10-deg release angle makes it easier to unclip
- 2-hole bolt pattern for mountain bike shoes
- Plastic spacing shims included
- Compatible with all Crankbrothers clip-in pedals

$135.00 - $149.99
Crank Brothers' Mallet 3 pedals sport the company's super easy-to-enter/exit 4-sided cages with wide aluminum/polycarbonate platforms for stellar support and stability, as well as tough chromoly axles with steel wings for durability, making these great pedals ideal for downhill riding and free riding. The open design quickly sheds mud for reliability in sloppy conditions and the traction pins grip well when you're riding clipped out between corners.

$179.99
Crank Brothers Mallet DH, the choice of DH world champions.
- Concave platform for secure foothold
- 8 adjustable pins per side for grip
- Traction pad technology customizable interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- 57mm q-factor for stability at speed
- 4-sided entry / superior mud shedding
- Customizable float and release angle
- Premium bearings and double seal system
- Spindle material: Forged scm 435 chromoly steel
- Body material: 6061-T6 aluminum
- Wing material cast: Stainless steel
- Spring material 300 series stainless steel
- Release angle 15° / 20°
- Max rider weight no restriction
- Q-factor 57mm
- Inner bearing type IGUS LL-glide bearing
- Outer bearing type enduro cartridge bearing
- Cleat premium brass cleats with shims included
- Adjustable pins 8 per side for grip
- Endcap hex alloy
- Weight: 479 grams

$350.00
The world’s most successful downhill pedal is now available in a premium edition featuring titanium wings and dual-chamfered edges to minimize weight and maximize performance. The Crank Brothers Mallet DH 11 is designed and engineered for the rider who wants the best of the best, and nothing less.
- Titanium wings for reduced weight
- Dual chamfered edges to reduce rock-strikes
- Exclusive double-anodized black and gold colorway
- Concave platform for secure foothold
- 8 adjustable pins per side for grip
- Traction pad technology customizable interface
- Ribbed body for better traction when unclipped
- 57mm q-factor for stability at speed
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
- Spindle material: forged SCM 435 chromoly steel
- Body material: 6061-T6 aluminum
- Wing material: 6AL/4v titanium
- Spring material: 300 series stainless steel
- Release angle 15° / 20°
- Max rider weight no restriction
- Q-factor 57mm
- Inner bearing type: IGUS LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Endcap hex alloy
- Cleat: Premium brass cleats with shims included
- Weight: 445 grams

$179.99
The ultimate pedal for enduro riding and racing, with a longer spindle.
- Concave platform for secure foothold
- 6 adjustable pins per side for grip
- Integrated traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- 57mm q-factor for increased shoe clearance and control
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
- Adjustable Pins: 6 per side
- Body Material: 6061-T6 aluminum
- Cleats: Premium brass cleats with shims included
- Endcap: Hex alloy
- Inner Bearing Type: Igus LL-glide bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Enduro cartridge bearing
- Q-factor: 57mm
- Release Angle: 15° / 20°
- Spindle Material: Forged scm 435 chromoly steel
- Spring Material: 300 series stainless steel
- Warranty: 5 years
- Weight: 424g per pair
- Wing Material: 17-4PH stainless

$179.99
Get a little more ankle room with this long-spindle version of Crank Brothers' Mallet E pedal.
- Concave platform for secure foothold
- 6 adjustable pins per side for grip
- Integrated traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- 57mm q-factor for increased shoe clearance and control
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system

$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
- SPD compatibility
- Weight (pair): 30g
- Float: 6 degrees
- Release angle: 15 or 20 degrees

$150.00
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: forged 6061-T6
- inner bearing type: igus LL-glide bearing
- outer bearing type: igus LL-glide bearing
- footprint: 100mm x 100mm (small) / 114mm x 111mm (large)
- adjustable pins: 10 per side
- minimal profile: 11mm-13mm thin
- stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- weight: 375g per pair (small) / 405g per pair (large)

$125.00 - $127.00
Chromag worked with Brandon Semenuk to design a pedal that features a lightweight, compact platform body that extends inboard bringing the riders feet closer to the cranks for superior control. The Contact pedal has a very low-profile, concave CNC’d surface that is only 13mm at pedal center and weighs in at only 190g per pedal.

$188.00
The Dagga is our brand new DH pedal. It was designed in collaboration with Chris Kovarik – one of the forefathers of downhill and flat pedal riding. Kovarik’s unique and high-impact riding style inspired the Dagga’s key features – our largest platform and widest stance ever.
- Meant to be ridden with thick-soled shoes, the Dagga offers improved stability, power and articulation of the bike.
- The Dagga features the same high strength chromoly axle system as other models with a double seal, inner bushing and outer cartridge bearing.
- Largest Q-Factor, largest body, longest and largest amount of pins!

$155.00
At 110 x 105MM, Chromag's Scarab pedals feature one of the widest platforms available, yet thanks to the thin profile and chamfered corners, it has great clearance. Chromag's proprietary extrusion and machined design provides an ultra thin true-concave profile that is only 13mm at platform center. Custom traction pins are made of hardened steel and feature two height options via the removable washer. A shear line reduces pedal damage when the pins are struck. Each pedal features 42 placement options for the ultimate customization. • Low profile 13mm at platform center • True concave design • Custom adjustable height pin • 42 pin placement options • 430g / pair

$120.00
Go full tilt with the completely redsigned ANVL Tilt pedal. Featuring our Arched Radius Concavity (ARC) design and oversized 105mm length and width, creates a perfect footbed that grips like no other pedal. The bulletproof internals feature two oversized bearings and inboard DU bushing to keep things rolling smoothly. The Tilt is 100% CNC'd that gives it a crisp clean look that is extremley durable and doesn't care if you rock shoes with sticky rubber or not.

$40.00
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals.
- Chromoly spindles
- Sealed cartridge bearing and bushing in an alloy cartridge
- Compatible only with iSSi Road pedals
- Installs with iSSi Road spindle tool (TL5499)
- Pedal Spindle: 9/16"
- Spindle Material: Chromoly Steel
Page 1 of 11
Next page