650B/27.5-Inch

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims - DH casing features 2 ply 60 TPI construction with a butyl reinforced sidewall for maximum durability With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The DHR II is the gold standard for riders wanting maximum traction and cornering grip when trail conditions get loose and muddy. - Ramped paddle-shaped center knobs roll efficiently and provide excellent traction for climbing and braking - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium - 3C MaxxGrip compound uses the stickiest, slowest rebounding rubber offered by Maxxis to provide lots of traction on the trail - Downhill casing tires are designed for extreme use in all gravity applications, made with two layers of durable 60 TPI casing material along with a large butyl rubber insert that extends from each bead into the sidewall

- Gen 2 Revised tread pattern - New knob layout based on feedback from World Cup DH and EWS riders - "Doublewide" knob now split into two individual knobs - More supportive cornering knobs - Additional siping to enhance braking and cornering traction - Raised ridges on casing to promote mud clearing

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Grand Prix 5000 S Tubeless Ready allrounder tires are lighter, faster and supported with stronger sidewalls, compared to previous GP5000 versions. Designed to be compatible with hooked and hookless rims, this new standard in road tubeless ready technology will allow you to ride faster, more comfortable and with increased puncture protection. - Hookless rim compatible up to 73 PSI / 5 bars - The tubeless ready (TR) carcass construction is robust and impervious against damage and penetration from foreign objects. The result: versatile, low weight and an attractive design. In addition, tires made using this technology can also be used as Tubeless or with an inner tube - Vectran Breaker is a synthetically manufactured high-tech fiber with an enormous tear resistance at a very low weight: Exactly the right properties to process into a premium Continental bicycle tire as a puncture protection insert - Active Comfort Technology absorbs vibrations and smoothens your ride - Lazer Grip, to make you one with the road. The lazered micro profile structure expands over the tire’s shoulder and provides outstanding cornering - BlackChili Compound provides the best balance of grip and rolling resistance for cycling

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The Maxxis Ikon is a versatile XC tire designed to perform in a broad range of conditions. With its predictable handling, the Ikon is also a favorite among our slopestyle athletes.

The world’s fastest riders are always hungry for more traction. So when Loïc Bruni, Finn Iles, and Chris Grice from the Gravity team reached out to us to develop a mountain bike tire to tame World Cup Downhill tracks, we cooked up something that will satisfy even the most aggressive appetites. We completely redesigned the Cannibal tread pattern, integrating our super-sticky GRIPTON T9 compound with a high-volume casing that brings superior control to any terrain. Staggered shoulder blocks maximize cornering stability, and large center braking blocks bite aggressively into the ground. Engineered to the design specifications of our riders, the Cannibal balances weight and durability with GRID Gravity casing for Enduro, Downhill, and Park riding. The Cannibal delivers the unbeatable combination of grip, confidence, and control to devour any track. - High-volume casing and staggered shoulder blocks for predictable high-speed cornering. - Re-designed center knobs and siping form strong surface connections. - Wide braking edges and massive center blocks cut in for maximum deceleration. - GRIPTON T9 compound reduces terrain-induced chatter, enhancing confidence at warp speeds. - Compliant and adaptable GRID GRAVITY 2-ply casing construction is ideal for Enduro, Park, and Downhill riding. - 2Bliss Ready technology protects against pinch flats, cuts, and punctures.

The Butcher GRID GRAVITY 2Bliss Ready T9 is the perfect choice for trail and gravity riders. Ramped and siped center tread blocks provide strong traction and accurate steering, while the shoulder knobs offer a continuous biting edge for railing through fast corners. The GRID GRAVITY casing compliments gravity riding with an all-new 2-ply construction for cornering stability and flat protection. Building on this solid base, the high-dampening T9 GRIPTON compound rebounds slowly to grip and stick to the ground for total traction and control. - 650Bx2.3", psi 25-50, approximate weight 1050g - 650Bx2.6", psi 20-40, approximate weight 1200g - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Casing: 60 TPI, Dual-Ply - Compound: GRIPTON T9

Enduro and e-MTB riders need ultimate versatility in a tire and the Eliminator GRID GRAVITY 2Bliss Ready delivers. Our GRID GRAVITY tires are made with a super tough 2-ply construction for cornering stability and flat protection. Building on this solid base, we added dual compounds with fast-rolling T7 compound center tread and the ultimate grip T9 compound shoulder lugs, for a combination of ultimate speed, durability, and cornering traction. - 650Bx2.3", psi 25-50, approximate weight 1050g - 650Bx2.6", psi 20-40, approximate weight 1100g - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Casing: 60 TPI, Dual-Ply - Compound: GRIPTON T7/T9

This Hillbilly MTB tire likes it raw. Gravity-focused, excelling in steep, slippery, loose, and wet conditions in the continental north, the all-new Hillbilly is designed specifically to find traction in shifty natural terrain and bring confidence and control to the unpredictable wild. The new mountain bike tire tread pattern features an aggressive tread with deep center knobs and high-volume shoulder blocks to bite through loose soil when cornering. Block-in-block transition knobs reinforce the tire structure, aid traction, and lower rolling resistance, from plowing deep loam to railing rock slabs and charging over slippery roots. Specialized’s exclusive Sticky Fast T9 rubber compound elevates the Hillbilly’s traction, enabling it to stick everywhere, even in the greasiest conditions. In addition to its ability to grip in slippery situations, our T9 compound is formulated to bring just the right amount of damping to the backwoods party, reducing tire bounce and deflection to enhance stability and control in challenging conditions. This tubeless-ready trail tire is available in either GRID Trail or GRID Gravity casing, covering trail, all-mountain, enduro, and downhill. GRID Trail’s bead-to-bead protection and stability make it an excellent choice for aggressive riding in rough conditions. GRID Gravity is a burly, two-ply construction designed for durability and puncture protection in extreme conditions, offering incredible strength and exceptional tire stability when loaded hard into corners and compressed into jump faces. Just add sealant as the Hillbilly is a 2Bliss ready clincher for easy mounting and inflation with or without tubes. - Large block-in-block shoulder knobs for supported cornering. - Spike center knobs to dig in and find traction over loose terrain. - High-damping GRIPTON T9 compound reduces terrain-induced chatter, rebounds slowly, and has extreme grip in all conditions. - GRID Trail Casing: 60 TPI, tough MTB trail construction with additional bead-to-bead protection for exceptional puncture resistance, sidewall stiffness, and stability. - 2Bliss Ready technology protects against pinch flats, cuts, and punctures. - GRID Trail 27.5x2.4; psi 25-50, approximate weight 985g. - GRID Trail 29x2.4; psi 25-50, approximate weight 1070g.

This Hillbilly MTB tire likes it raw. Gravity-focused, excelling in steep, slippery, loose, and wet conditions in the continental north, the all-new Hillbilly is designed specifically to find traction in shifty natural terrain and bring confidence and control to the unpredictable wild. The new mountain bike tire tread pattern features an aggressive tread with deep center knobs and high-volume shoulder blocks to bite through loose soil when cornering. Block-in-block transition knobs reinforce the tire structure, aid traction, and lower rolling resistance, from plowing deep loam to railing rock slabs and charging over slippery roots. Specialized's exclusive Sticky Fast T9 rubber compound elevates the Hillbilly's traction, enabling it to stick everywhere, even in the greasiest conditions. In addition to its ability to grip in slippery situations, our T9 compound is formulated to bring just the right amount of damping to the backwoods party, reducing tire bounce and deflection to enhance stability and control in challenging conditions. This tubeless-ready trail tire is available in either GRID Trail or GRID Gravity casing, covering trail, all-mountain, enduro, and downhill. GRID Trail's bead-to-bead protection and stability make it an excellent choice for aggressive riding in rough conditions. GRID Gravity is a burly, two-ply construction designed for durability and puncture protection in extreme conditions, offering incredible strength and exceptional tire stability when loaded hard into corners and compressed into jump faces. Just add sealant as the Hillbilly is a 2Bliss ready clincher for easy mounting and inflation with or without tubes. - Large block-in-block shoulder knobs for supported cornering. - Spike center knobs to dig in and find traction over loose terrain. - High-damping GRIPTON T9 compound reduces terrain-induced chatter, rebounds slowly, and has extreme grip in all conditions. - GRID Gravity 2-ply casing construction is ideal for Enduro, Park, and Downhill riding. - 2Bliss Ready technology protects against pinch flats, cuts, and punctures. - GRID Gravity 27.5x2.4; psi 25-50, approximate weight 1240g. - GRID Gravity 29x2.4; psi 25-50, approximate weight 1340g.

The latest generation of the World-Cup-proven intermediate tire, the Butcher GRID TRAIL 2Bliss Ready, receives an entirely new tread pattern. Wider shoulder knobs better support load under hard cornering, while the biting edges of the shoulder knobs are moved further inside, and the center blocks have been staggered and spaced better for a smoother transition when leaning the bike over. Meanwhile, our proprietary GRIPTON compound improves high frequency damping, attaching the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. It's the perfect choice for your gravity excursions—one ride and you'll be hooked. Building on this solid base, the high-dampening T9 Gripton compound rebounds slowly to grip and stick to the ground for total traction and control. - Casing: 60tpi light yet tough with additional bead-to-bead protection for exceptional durability, sidewall stiffness, and stability. - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T9

The latest generation of the World-Cup-proven intermediate tire, the Butcher GRID TRAIL 2Bliss Ready, receives an entirely new tread pattern. Wider shoulder knobs better support load under hard cornering, while the biting edges of the shoulder knobs are moved further inside. The center blocks have been staggered and spaced better for a smoother transition when leaning the bike over. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pressures, all while increasing pinch flat protection by 15% and puncture protection by 30%. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, gripping the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. - Casing: Additional bead to bead protection for exceptional durability plus sidewall stiffness stability - Compound: GRIPTON - Pressure: 25 – 50psi - Folding bead - 2Bliss Ready

The Butcher GRID TRAIL 2Bliss Ready T9 features a World-Cup proven aggressive tread design to bite and grip in any condition. Ramped and siped, the center tread blocks provide maximum traction and accurate steering. The sawtooth faced shoulder knobs offer a continuous biting edge for railing through corners. Our GRID TRAIL casing is a step up from GRID with more reinforcement, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. The high-dampening GRIPTON® T9 compound rebounds slowly to grip and stick to the ground for total traction and control. - Casing: 60 TPI, tough trail construction with additional bead to bead protection for exceptional puncture resistance, sidewall stiffness and stability. - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON® T9

The Eliminator GRID TRAIL 2Bliss Ready tire features a new generation of tread that combines an aggressive block design with a well-balanced tread pattern. Its transition knobs help bridge the traditional channel between center and shoulder knobs, making the Eliminator perfect for enduro where versatility is key. The Eliminator still has the bite of a DH tire but also brings the manners to handle well on hardpacked trails. These characteristics also work well for trail e-bikes, too—combining the traction needed to stay in control on the trail with neutral handling on fire roads. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pleasures—all while increasing pinch flat protection by 15% and puncture protection by 30%. - Casing: Additional bead-to-bead protection for exceptional durability, plus sidewall stiffness stability - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 27.5 x 2.6" - PSI range: 20-40 - Approximate weight: 850g

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. - Staggered shoulder blocks for predictability and corner control. - T9 Balanced grip and rolling compound. - GRID Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability. - Tubeless Ready.

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. - Staggered shoulder blocks for predictability and corner control. - Compound: T7 for balanced speed and rolling efficiency. - Tubeless Ready. - GRID Trail 27.5x2.4' T7, psi 25-50, approximate weight 915g. - GRID Trail 29x2.4' T7, psi 25-50, approximate weight 980g.

The Fast Trak Control 2Bliss Ready T5 has become synonymous with fast and lightweight tires that are able to handle the most technical courses and the most grueling conditions. This model redefines what was thought possible with a cross-country tread design. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support, and stable handling. Adding to this, the Fast Trak profile and knob spacing has been optimized for a wide variety of internal rim widths. The Control casing is our light and durable do it all XC construction. To top off this build we use our fastest rolling, race-ready T5 compound with excellent wear and tear protection. - Casing: 60 TPI, light and durable do it all XC construction. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Compound: GRIPTON® T5.

The Ground Control Control 2Bliss Ready T5 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The Control casing is our light and durable do it all XC construction. To top off this build we use our fastest rolling, race-ready T5 compound with excellent wear and tear protection. - Casing: 60 TPI, light and durable do it all XC construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T5 - 27.5 x 2.35", PSI 25-50, approximate weight 720g

The Ground Control Grid 2Bliss Ready T7 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The GRID casing provides a light and supple trail construction with additional sidewall protection for durability and sidewall stability. To top off this build we use our T7 compound to maximize grip and damping. - 27.5 x 2.35", PSI 25-50, approximate weight 800g. - 27.5 x 2.6", PSI 25-50, approximate weight 850g. - 27.5 x 3.0", PSI 25-50, approximate weight 1050g. - 29 x 2.2", PSI 25-50, approximate weight 820g. - 29 x 2.35", PSI 25-50, approximate weight 845g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability. - Compound: GRIPTON T7.

The Ground Control Grid 2Bliss Ready T7 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The GRID casing provides a light and supple trail construction with additional sidewall protection for durability and sidewall stability. To top off this build we use our T7 compound to maximize grip and damping. - Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T7 - 27.5 x 2.35", PSI 25-50, approximate weight 800g - 27.5 x 2.6", PSI 25-50, approximate weight 850g

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. - Staggered shoulder blocks for predictability and corner control. - T7 Balanced grip and rolling compound. - GRID Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability. - Tubeless Ready. - GRID 27.5x2.4' T7, psi 25-50, approximate weight 870g. - GRID 29x2.4' T7, psi 25-50, approximate weight 925g.

Born in the American Midwest, gravel riding is one of the fastest–growing styles of cycling. The sense of adventure, conquering new challenges, and simply experiencing a new style of riding are some of its big selling points, but doing so without the proper tires makes the difference between having fun and cursing and hollering on the side of the road. The Pathfinder delivers the versatility that these adventure-laden rides deserve—fast rolling, lots of grip, and a whole lot of fun. - Casing: 120 TPI - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - Flat Protection: Endurant Casing and BlackBelt - 650b x 47mm [1.75"], psi 35-65, approximate weight 555g - 700 x 38mm, psi 50-80, approximate weight 480g - 700 x 42mm, psi 50-80, approximate weight 540g - 700 x 32mm, psi 50-80, approximate weight 380g

- A tire that is exclusively designed to be ridden in bike parks. - It takes many of the same technologies from the rest of the range but using a more durable compound to give it a longer lifespan for those extra laps of the park.