Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$358.00
Built with input from the world’s best riders, Charger 3.1 RC2 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression (HSC), Low Speed Compression (LSC), and Low Speed Rebound adjustments, Charger 3.1 RC2 smooths out the roughest trails. FEATURES - Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, this gives you the traction, control, and comfort you need to charge dicey lines all day - Includes full right-side internals including controls - Compatible with Pike C1+(2023+), Lyrik D1+(2023+), and ZEB A1+(2021+) - High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments - Includes vibration-fighting ButterCups to block 20% of trail chatter
$225.00
36 Air Shaft Assembly for Fox suspension forks.
$193.70
Master cylinder assemblies for Magura brakes include a master cylinder, lever blade and handlebar clamp. Hose fittings and line are sold separately. Flip flop design allows unit to be mounted to either the left or right side.
$130.00
38 Air Shaft Assembly for Fox suspension forks.
$125.00
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 54T
$94.99
Eliminate dropped chains forever with the new OneUp Components Bash Guide. As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. Revised for 2019 the OneUp Bash Guide uses simple, one tool installation and adjustment as well as an all new tool less flip The OneUp Bash Guide was developed with input from top EWS World racers and can be seen all over this years circuit. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 105g (34T) you may forget it’s even there. NOT JUST FOR ENDURO RACERS. The OneUp Bash Guide is equally at home on your trail bike, where the extra bash protection is a must for aggressive riders or on your DH rig. With the popularity of clutch derailleurs, it is no longer necessary to run a chain guide with a lower roller to effectively tension your chain. DH racers and Bike Park rippers will appreciate the huge reduction in drag with the elimination of the lower roller, without sacrificing any strength or chain retention. The OneUp Bash Guide includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. FEATURES - Tool less upper guide flip - Install without removing your crank - Single tool install and adjustment - Boost compatible - Oval Compatible - Black Stainless Steel hardware - Includes 3 bash plates (28-30T, 32-34T, 36T) - Patented US 10,053,188 Other Patents Pending SPECS - Weight: 90g 28-30T, 105g 32-34T, 110g 36T - Capacity: 28-36T - Chainline: 7.5mm adjustment - Mount: ISCG05 - Color: Black top guide piece included - Material: 7075 aluminum, top guide glass reinforced thermoplastic
$90.00
Specialized Turbo Road Remote
$89.99 $130.00 31% Off
If you're looking to either increase or decrease the travel of your 2021/2022/2023 Fox Float 38 fork, simply purchase this air shaft and install it into your fork. - Includes brand new air shaft seals pre-installed - Includes new snap ring, foot nut and crush washer - Compatible with all models of the Fox 38, including the Fox 38 E-Tuned
$89.00
- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide RS
$88.99
Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts
$88.99
Cartridges fully replace the functional mechanism of KS dropper posts. Pick the model and length of drop for the post you need to service. These are also called "Oil Pressure Sticks" and "Air Pressure Sticks" In KS Service Documentation. - Fully replace the functional mechanism of KS dropper posts - May not work with OEM dropper posts
$85.00
- 200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Charger 2 sealhead,DebonAir seals)—Pike B1 (2018+)
$85.00
Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.
$85.00
Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.
$80.00
Fit Kit SET813 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12 mm rear thru axle. This kit includes: - 12 x 154—172mm thru axle with 1.0 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$80.00
Fit Kit SET826 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12 mm rear thru-axle. This kit includes: - 12 x 175—184mm thru axle with 1.0 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$79.00
Glovebox Hardware Kit
$78.99
The new Stumpjumper EVO chassis was built with all the geometry and suspension adjustment you need to make it your own, based on your riding style and terrain. The Stumpjumper EVO 27.5 Suspension Link allows you to run your 2021 to present Stumpjumper EVO with a 27.5” rear wheel. Our mixed-wheel link adjusts the geometry and kinematics on the chassis for the smaller rear wheel, providing you with an easy solution to run this setup while maintaining the intended suspension performance and geometry. In comparison to the all-out speed and traction of a front and rear 29” wheel, a mixed-wheel setup provides a nimbler ride with quick cornering and additional rear wheel clearance when getting over the back of the bike. Forged and CNC’d alloy link. Includes full complement sealed bearings pressed into link. Geometry and kinematic corrects for 27.5” rear wheel. 155 mm of travel. Compatible with 2021 to present Stumpjumper EVO Carbon chassis. No other chassis parts required (does require a 27.5” wheel and tire).
$75.00
The Charger 3.1 RC2 Piston Kit upgrades existing Charger 3 dampers to the NEW Charger 3.1. With increased damping range, Charger 3.1 RC2 is primed to take on any trail. Less compression damping in the Low Speed Compression open position and additional support in the High Speed Compression closed position gives you the traction, control, and comfort you need to charge dicey lines all day. FEATURES - Upgrades existing Charger 3 dampers to Charger 3.1 - Includes piston assembly, tuning shims, and Head Valve Tool - Compatible with Pike C1+(2023+), Lyrik D1+(2023+), and ZEB A1+(2021+) Charger 3 dampers - High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments
$75.00
An essential part of any passenger-carrying system is something they can hold for balance. The Globe Passenger Handlebar bolts to the top of the Haul rear racks to provide passengers of all ages with a comfortable and safe grip. The reversible and versatile design can be mounted anywhere along the rack for a fully customizable setup. **For Globe Haul ST: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. ** - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - All tools required for assembly are included with the purchase of the Haul ST or Haul LT bike.
$74.00
Lower Link Kit for: 5010 AL 3 5010 C 3 Kit Includes: Link with bearings pressed in. Please fill the link with grease prior to installation and riding. We make quality bicycles that are built to last. We make them easy to service without specialist tools or specialist skills. So easy that even members of our marketing team can do it with one eye closed (if we hide the sharp tools from them). Just be sure to reference all of the correct torque values for your specific model on our archive pages. However, if you don't know which end of a hammer to hold then we'd suggest having your local Santa Cruz Dealer lend you a helping hand.
$70.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Chgr2.1 damper sealhead, DB air spring sealhead) - Lyrik C2/Pike B3 Sel+ and Ult (2020)
$70.00
- Pike and Pike DJ Solo Air 1 year service kit - Includes dust seals, foam rings, o-ring seals, Charger sealhead, SA sealhead
$27.00 - $69.99
Our fixed bolt seatpost clamp is simple yet elegant and reliable. It's the perfect finishing touch to your Chromag kit. CNC machined in Canada. - Material: 6061 Alloy - Weight: 22g
$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility
$69.95
The Wolf Tooth ReMote Pro is the most adjustable and refined dropper lever. It can be moved laterally along the handlebar and rotated around the handlebar as can be done with all dropper levers, while also allowing for 48 deg of rotation to set the lever starting point, independent of cable tension – no other dropper lever allows for this to be adjusted. ReMote Pro also has a cable pulley with a cam (oval) shape that provides more leverage at the beginning of the lever throw; this is when dropper posts need more force to open the fluid reservoir valve that allows the post to move. And just like other Wolf Tooth dropper levers, ReMote Pro features a large sealed custom bearing and is machined at Wolf Tooth in Minnesota, USA. - Machined surface of paddle provides extra grip - 6061 T6 aluminum construction with Delrin axle - Large sealed cartridge bearing is shielded from the elements - Stainless steel bolts for unprecedented adjustability - Cable clamp won’t pinch or bend cable - Integrated barrel adjuster is the only plastic component - Compatible with all cable-actuated dropper posts - Various clamp options to integrate with brakes from popular manufacturers
Page 1 of 7 Next page