Brakes/Levers/Pads

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

CenterLine X rotors are the lighter weight version of SRAM's quiet, smooth, and robust CenterLine rotors. The CenterLine X rotor features a two-piece design with an alloy center and steel brake track. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Lightweight, two-piece design - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: 6-bolt - Includes Steel rotor bolts

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes - Includes steel rotor bolts

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

If you believe in better performance then you should believe in hydraulic road (HydroR) brakes. SRAM's award winning HydroR technology is the fulfillment of the promise of better braking, more control, and improved performance in all conditions. SRAM RED is delivering on the promise of braking confidence and security that brings speed control and stability to a new level. - RED ergonomics including Reach Adjust - SRAM Road 11-speed compatible - Optimized power and modulation for higher speeds and more control - Refined lever body design is more comfortable - Easy access bleed port means convenient service - Shift paddle design is lightweight and offers improved finger clearance - Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

Caliper only - does not include lever or hose. - Compatible with all SRAM road hydraulic brake levers - Includes steel-backed organic pads - 18mm Front/Rear - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: DOT - Pad Compound: Organic

Guide T brings consistent performance and reliable stopping power thanks to a revised lever design and lightweight four-piston caliper. Featuring SRAM's Directlink lever, updated master cylinder and timing port closure, all combined to provide a more positive braking system. - Bleeding Edge, drip-free bleed port closure and adaptor to minimize fluid loss - Heat Shield technology to reduce caliper fluid temperature and prevent loss of braking power - MatchMaker compatible for a clean and simplified look - Ambidextrous lever mount design - Lightweight 4-piston dual-diameter caliper - Includes steel-backed organic pads - Front includes 950mm hose - Rear includes 1800mm hose

When you choose to ride, advancement means having a group that’s always ready. Apex 1 is that group. As a left lever for your Apex 1 setup, or paired for single speed adventures, the Apex mechanical brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. - ErgoFit design from SRAM RED improves grip and finger wrap - Reach Adjust for a perfect fit - Durable, forged aluminum lever blade with laser texture for a positive touch

Guide Ultimate Lever Assembly

SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precision braking and shifting performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. SRAM Force 22 is designed to work with 11-speed cassettes. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!

We spend a lot of time obsessing over feel, and SwingLink technology brings our best R&D to life. The G2 RS offers riders the joys of SwingLink—getting brake pads to the rotor fast, then moderating pressure with smooth modulation. It's one small movement for your finger, one monumental upgrade to your braking. - Power organic pads give riders both feel and bite - Bleeding Edge for simple fluid installation and maintenance - Tool-free reach adjust for quick personalization

For the Ultimate, we held nothing back. Our engineers sculpted the finest materials—titanium and carbon fiber—to make this our lightest four-piston brake ever. Power, modulation, and lever feel set a new standard. Personalization is quick and intuitive. And, for performance—well, our test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a new pad compound with bite - Pivot bearings for crisp lever feel and a fatigue-free ride - SRAM's best power-to-weight ratio in a four-piston brake

SRAM's Force CX1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike, and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side, hydraulic-brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.

The SRAM Level brake levels the playing field with power and reliability stuffed into a lightweight package. This is no-nonsense performer, but don’t let its understated disposition fool you—Level gives you the art of braking in minimalist form.

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

The cores of brake performance are consistency, reliability, and trust. And, with G2 R, we focused on offering a premium value without compromising the heart of the operation. This brake gives riders the G2s famed "Mini-Code" power and a whole suite of SRAM standard features at an absolutely unbeatable value. - Power organic pads give riders both feel and bite - Engineered for easy installation and maintenance - Tools-free reach adjust for quick personalization

Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.

Caliper only - does not include lever or hose. 18mm front or rear. Includes steel-backed organic pads - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: DOT

With comfortable hoods and lightweight aluminum levers, SRAM's 500 Single Speed Brake Levers are the perfect choice for your non-geared bike. Even if you don't run gears, you can still get all the renowned ergonomic, high-level SRAM lever function.

- Capable of handling the higher average speeds and increased mass of trail ready E-MTBs. - G2 R lever with a powerful 4-piston caliper derived from the gravity-focused Code brakes.

Disc brake lever assembly - aluminum lever (assembled, no hose) diffusion black ano - mineral fluid brake - DB8 (A1)

- Simple, robust, powerful brake for riders who prefer to work with Mineral oil. - The lever is designed with proven lever technologies and features easy adjustment access and superior ergonomic comfort. - The caliper is based on the Code downhill brake and utilizes the same pads. - Post-mount. - Designed for use with Maxima Mineral Oil only.

The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management - Hub Compatibility: Center Lock - Disc Material: Steel

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

- Disc brake caliber assembly - Assembled - No hose - Code R B1/RSC A1

Sleek, easy to use, yet immensely powerful. Code R packs a winning punch with a reliable DirectLink lever mated to Code’s new oversized four-piston caliper. SRAM’s signature ergonomics are supplemented by the tool-free reach adjust for a fit to each riders’ needs, to unleash Code’s superior braking power, consistency, and modulation. - Four aluminum pistons provide the stopping power and excellent heat management - Stainless steel heat shield breaks the thermal connection between the brakes pads and the caliper body, which reduces fluid temperature - Forged aluminum lever body and blade - Bleeding Edge design for easier maintenance - Includes steel-backed sintered metal pads