Filter By:
- BMX (2)
- Bottom Brackets (14)
- Brakes/Levers/Pads (88)
- Cables (7)
- Cassettes/Freewheels (21)
- Chainrings (30)
- Chains (37)
- Cranksets (17)
- Show More Categories
- Derailleurs (24)
- Forks (4)
- Groups (9)
- Handlebar Grips/Tape (40)
- Handlebars (33)
- Headsets (17)
- Pedals (59)
- Saddles/Pads (35)
- Seatposts (26)
- Shift/Brake Combinations (3)
- Shifters (18)
- Shocks (2)
- Stems (24)
- Other (185)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$1,999.00
The inverted Fox Podium is Fox's dedicated Enduro racing platform, with serious performance advantages over a standard fork. Lower unsprung mass, better lubrication, more bushing overlap, higher fore aft stiffness, and a perfect blend of torsional compliance make this fork perfectly suited for the highest level of enduro racing. The rougher and rowdier the better for the Fox Podium, offering more traction and confidence than any other single crown fork for both ebikes and normal mountain bikes to be ridden like downhill bikes.
Podium is only compatible with a 20x110mm Boost front hub, which means you'll need to replace either just your front hub or entire front wheel to install this fork on your current bike.
Hub Spacing: 20x110mm Boost only
Offset: 44mm offset only
eMTB Approved?: Yes
Color: Black w/ Gold Decals
Wheel Size: 29"
Damper: GRIP X2 (Adjustments: LSC, HSR, LSC, HSR)
Axle: Kabolt-X
Travel: 170mm
Stanchion Finish: Kashima Coating
Crown Size: 58mm
Bleeder Valves: Yes
Floating Axle: Yes
Rotor Size: 200 direct Post Mount, maximum rotor size of 230mm
Mud Guard Mount: Yes, Podium Specific mud guard is launching later this year
Air Spring: Glidecore NA3 Float Air Spring
Steerer: 1.5 Taper
Starting Weight: 2695g
$1,599.00
The SRAM X0 Eagle T-Type AXS™ Transmission groupset is their most robust high-performance transmission. This T-Type transmission takes a holistic approach to a bicycles shifting, an entire system synchronized, providing you with a superior ride experience.
- AXS™ Pod ULT features a “click and fire” two-button design that transforms the crucial act of rider inputs into a vastly more personal experience for all your AXS™ controls
- Engineered as integrated, interdependent transmission components, the X0 Eagle T-Type rear derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface
- X0 T-Type derailleur offers the same intuitive pairing and set-up procedure as SRAM's Eagle AXS™ derailleurs
- Derailleur features an overload clutch that boosts resiliency and a tucked-in profile that houses protection covers on the fully replaceable B-knuckle and outer link
- The X0 Eagle T-Type 10-52t cassette and derailleur contact directly, ensuring perfect alignment on every bike
- Shifting under load is made possible on the X0 Eagle T-Type cassette due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output
- The X0 T-Type DUB all-aluminum crankset is the most advanced aluminum crankset SRAM has ever made and provides riders with a perfectly balanced stiffness to weight ratio
- Crankset includes a removable 2-Guard aluminum bashguard for more rugged terrain to protect your chainring
$1,429.00
The X0 Eagle AXS E-Bike Transmission groupset is SRAM’s most robust high-performance transmission. The T-TypeTransmissions take a holistic approach to a bicycle shifting, an entire system synchronized, providing you with a superior ride experience. Shifting under load is made possible on the X0 cassette due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output.
The X0 Flattop Transmission chain features a Dark Polar finish specific to X0, has been plated with electroless nickel, and comes with a PVD coating for unbelievable resistance to corrosion and wear. Fully approved for E-MTB use with solid pins. Featuring a “click and fire” two-button design, The AXS Pod Ultimate controller transforms the crucial act of rider inputs into a vastly more personal experience for all your AXS controls.
- X0 Eagle Transmission derailleur; Engineered as integrated, interdependent transmission components, the X0 Eagle T-Type rear derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hanger-less Interface
- Shifting under load is made possible on the X0 Eagle T-Type cassette due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output
- 10-52T X0 Eagle Transmission cassette:The X0 Eagle T-Type 10-52t cassette and derailleur contact directly, ensuring perfect alignment on every bike
- X0 Eagle T-Type flattop chain is plated with electroless nickel and comes with a PVD coating for unbelievable resistance to corrosion and wear
- AXS POD ULT features a “click and fire” two-button design that transforms the crucial act of rider inputs into a vastly more personal experience for all your AXS controls
- AXS battery/charger
- Includes clip-on guard and 104BCD 36T ring. Crank arms not included
$1,249.00
When you need to go really big, reach for the 38. Optimized for 160-180mm of travel, the 38 redefines capability of a long travel single crown fork, setting a new benchmark for confidence, performance, and durability.?Welcome to the big time.
GRIP X2
Ultimate descending performance with greater traction and even more control at speed. The most tunable, supportive and smoothest descent-focused damper created by FOX.
KABOLT X AXLE
A lightweight bolt-on floating axle that shaves grams while increasing torsional stiffness and reducing friction between upper and lower fork legs for smoother suspension travel.
LOWER LEG BLEEDERS AND BYPASS CHANNELS
Push-button pressure equalization (bleeders) and increased volume to alleviate pressure ramping (bypass channels) allow improved small bump sensitivity and responsiveness.
DAMPER GRIP X2
DAMPER CONTROLS HSC - LSC - HSR - LSR
AXLE Kabolt-X 110
RAKE 44mm
STEERER 1.5 Tapered
UPPER TUBE FINISH Kashima
AIR CHANNELS Yes
BLEEDERS Yes
FLOATING AXLE Yes
ROTOR SIZE 180 direct Post Mount, Up to 230 compatible
MUD GUARD MOUNT Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment
AIR SPRING FLOAT EVOL
STARTING WEIGHT 2194g (38, 29, F-S, 180, Grip X, Kabolt X)
$1,199.00
The drivetrain embraced by core riders as the All Day best friend is now available in Transmission. The no-compromise, budget minded ethos remains built into the system but is modernized for a new generation of bikes. The GX Eagle Transmission derailleur every bit as crisp and precise as the other derailleurs in the transmission family, but features things like removable skid plates for better protection and serviceability. Shifting under load is made possible on the GX cassette due to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. The GX Eagle Transmission DUB crankset stands apart and gives no-nonsense riders a no-compromise balance of form and function. It’s the crankset where pure performance meets optimal value. Its unique shape has been forged out of aluminum for strength without bulk. Its available composite removable bashguards add functionality and lets riders manage scuffs and scrapes that come with the territory. The GX Eagle Transmission (T-Type) chain is the strongest we have ever made. Specifically engineered to optimize Eagle Transmission, this all-new T-Type design features a unique flat top, and is developed specifically for the added torque loads of E-MTB thanks to its solid pins that give it incredible strength.
- Available with 165, 170, 175mm crankarm and 32T chainring
- Bashguard compatible
- GX Eagle Transmission derailleur
- 10-52T GX Eagle Transmission cassette
- GX Transmission Flattop chain
- Pod controller
- AXS battery/charger
$1,159.00
Built for the best riders, ridden on the hardest tracks, ZEB Ultimate rules the world’s toughest enduros. Equipped with the new Charger 3.1 RC2 damper, ZEB gives riders exceptional adjustability for the right balance of comfort, control, and speed. Alongside this flagship damper, the stout 38mm chassis rides on vibration-killing ButterCups and a DebonAir+ spring. The technology you need for the fastest split times, the style you want on the start line: This is ZEB.
FEATURES
- NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails.
- NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day.
- NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box.
- ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control.
- DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butterlike small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep.
- Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride.
- Bolt-in torque cap adapters now included for use with standard hub end caps.
- Lightweight machined and anodized crown for premium looks and durability.
- Available in Signature colorways Electric Red, Slab Grey or Ultimate High Gloss Black.
- Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel.
- Short fender compatibility. (RockShox fender included)
$1,149.00
THE UNDISPUTED ALL-MOUNTAIN CHAMPION
Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders. Available in both trail-focused GRIP X and gravity-focused GRIP X2 damper options.
To celebrate 50 Years of pushing potential further, FOX is releasing a run of Factory forks in our brand-new limited Podium Gold colorway. Once sold out, this color will not be restocked.
Your FOX 36 Fork:
Part Number 910-21-259
Rake 44mm
Chassis Standard
Wheelsize 29in
Series Factory
Travel 160mm
Damper Grip X
Damper Controls HSC-LSC-LSR
Axle Kabolt-X 110
Steerer 1.5 T
$985.00
XTR M9250 Di2 Wireless Upgrade Kit- I-SPEC EV
Includes:
- RD-M9250 Rear Derailleur
- SW-M9250 Shifter
- BT-DN320 Battery
- EC-DN100 Charger
- SM-CN910-12 Quick link
$949.00
The drivetrain embraced by core riders as the All-Day best friend is now available in Transmission with full e-bike compatibility. The GX Eagle Transmission derailleur every is every bit as crisp and precise as the other derailleurs in the transmission family, but features things like removable skid plates for better protection and serviceability. Even on an e-bike you are now able to shift under load thanks to a combination of X-SYNC technology and cassette mapping, creating seamless shifts even during your hardest power output. It also features a revised 10-52T range, making even the longest climbs easy. The GX Eagle Transmission (T-Type) chain is the strongest SRAM has ever made. Specifically engineered to optimize Eagle Transmission, this all-new T-Type design features a unique flat top, and is developed specifically for the added torque loads of E-MTB thanks to its solid pins that give it incredible strength.
- GX Eagle Transmission derailleur
- 10-52T GX Eagle Transmission cassette
- GX Transmission Flattop chain
- Pod Controller
- AXS battery/charger
- Crankarms not included
$745.00
$780.00
4% Off
Our high performance, robust air-sprung shock is best suited to bikes with more progressive linkage ratios. The TTX2Air has larger positive and negative air chamber volumes, a double-can, air spring design with additional control of the air volume spacing. This gives riders greater freedom to adjust the spring curve and easily dial-in the exact amount of progression they desire.
The TTX2Air delivers the unrivalled sensitivity, control and flawless all-conditions damping that TTX products have built their reputation on.
Initial set-up of the TTX2Air shock is really easy to do – check out the video here. We’ve made more involved tuning, such as altering volume spacers or adjusting the stroke, as straightforward as possible so it can be performed even with basic skills.
Once dialled-in, you’ll immediately appreciate the shock’s super-plush feel that increases comfort over long, demanding rides, maintains momentum over roots and rocks and also has the capacity to soak up more serious hits. The TTX2Air’s superb levels of confidence inspiring traction and control will encourage you to push your bike harder and faster than ever before.
The TTX2Air combines the superior damping function of our TTX system together with a low friction air-spring. The twin-tubed design enables two-way oil flow through the piston and the double tubes. With the ability to extensively tune the pressure when the oil passes the compression and rebound valves, we have created a well-balanced and extremely predictable damper. This results in a highly effective range of clicks enabling you to easily dial-in the shock and achieve the perfect suspension set-up.
The TTX2Air upgrades an already proven package of damping performance. The metric system design has also allowed us to increase the bushing overlap, making it more robust and improving side load protection. Our wiper seal and air sleeve lubrication technology minimizes friction and delivers outstanding performance that resists fading between service intervals.
Just like every product fitted with TTX damping technology, the TTX2Air has a race-proven settings bank giving access to a huge range of options for tuning the damper to suit any specific rider, bike or riding style.
Öhlins Performance Suspension Guide
Do you want to know which suspension models best suits your bike? Click here to use our Performance Suspension Guide, it will also recommend a personal set up based on your weight and desired sag.
Technologies
No one knows suspension like Öhlins, our proprietary technologies – developed from multi-discipline know-how help you ride smoother, faster and push the boundaries of your MTB. To learn more about our suspension technologies, click here.
Servicing & Support
Regular and effective maintenance is the key to maintaining the optimum function and performance of your Öhlins suspension forks and shocks. Öhlins products can be serviced at any authorized service center and basic service can be performed by riders with intermediate mechanical skills, using commonly owned tools.
$735.00
Mechanical shifting at its best. Eagle 90 delivers the dream and then some. Featuring the same full-mount derailleur architecture as its AXS Transmission siblings, it is unquestionably robust. And for the just in case, the derailleur body features replaceable outer and inner parallelogram links, skid plates, and a tool-free threaded cage assembly, making it the most rebuildable derailleur we’ve ever built. At the heart of the system is a sleek and sturdy forged aluminum DUB crankset, with a signature silver T-Type chainring equipped with removable bash guards. Shifting under load is a signature of Eagle Transmission, and this is made possible on 90 with an XS-1275 T-Type cassette that features full X-Sync technology and a premium double-click T-Type Actuation mechanical shifter. For those inclined to DIY, mechanical Eagle Trans-mission has a revolutionary, simple four-step setup procedure: Prepare. Hang. Tighten. Route. Featuring no limit screws, no b-tension, and no guesswork. Built to take you as far as your imagination and body will allow, Eagle 90 Transmission provides riders with an unparalleled ride experience.
Features
- Hangerless Interface (UDH) frame compatibility only.
- Distinct black and silver finish.
- Available with 165mm, 170mm, 175mm DUB crankarms, and 32T T-Type chainring with two bash guards.
- Eagle 90 shift lever features stealth architecture and MMX compatibility for seamless pairing with SRAM brakes. Cockpit tidying Shift Housing/Brake Hose clip included.
- Shift lever is built with modern shift ergonomics and a premium textured aluminum lever touchpoint.
- Black XS-1275 features 10-52t range and full X-SYNC technology for best inboard and outboard shifting performance under load.
- Full Mount Eagle 90 derailleur is the most rebuildable Eagle Transmission derailleur, with replaceable B-Knuckle, Inner/Outer Links, Bash Guards, Bushings, Cage, and Cage Assembly.
- Includes GX Eagle Transmission Flattop chain.
$700.00
The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It's the fastest leading edge we've ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we've ever made, with no compromises. It's aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory.
AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar's leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference.
LIGHT AND STIFF: By removing the stem's hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we've ever made.
FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we've got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar.
- Aerodynamically engineered to save 4 watts vs a traditional aero road bar
- Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts
- Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm)
- Bend: 125mm drop x 75mm reach, 4 degrees of flare at the drops
- Stem Angle: 6-Degrees
- Steer Clamp Diameter: 31.8
- Weight: 310 grams (100mm x 420mm)
- Cable Routing: Shimano, SRAM, Campagnolo ( Internal/Electronic Compatible)
- Compatible with Roval bolt on computer mount, S219900058.
- System Weight Limit: 275lbs/125kg
$670.00
This Shimano XTR M9220 4-Piston Hydraulic Disc Brake Upgrade Kit combines the trail-tuned ergonomics and power modulation of BL-M9220 brake levers with the advanced stopping power of BR-M9220 brake calipers in an inclusive set that features nearly all materials needed to upgrade to the next-level performance of XTR. In the hand, BL-M9220 brake levers utilize refined ergonomics for a natural feel and a powerful sense of pull that features modulation that enables better trail control. BR-M9220 brake calipers express DH-capable power, consistency, and control; a revised low viscosity mineral oil formulation sustains a consistent bite point in all weather conditions.
Features:
- Enduro-focused hydraulic disc brake upgrade kit
- XTR BL-M9220 levers demonstrate trail-focused shape and design
- XTR BR-M9220 caliper acts with a DH-capable power curve that fits enduro riding demands
- Low-viscosity mineral oil design creates reliable performance in all conditions
- Rattle-free brake pad design features heat-dissipating fins
- Includes Resin and Metal brake pad options
$633.00
The day-in, day-out Eagle ecosystem hero is now available with AXS. The GX AXS upgrade kit is your entry point into wireless drivetrain simplicity. Compatible with any of our Eagle ecosystem cassettes and crank arms, the upgrade kit allows you to experience AXS without needing to buy an entire groupset—provided you already are using Eagle products. No matter if you are looking to upgrade your ride or looking for great value replacement parts, look no further than the GX AXS upgrade kit.
- Includes the SRAM GX Eagle AXS rear derailleur with battery, Eagle controller with clamp, charger with cord, and chain gap tool
- The GX Eagle AXS rear derailleur shifts on command, whether under climbing load or sprinting to the stage finish, and is smart enough to protect itself thanks to its incredibly resilient Overload Clutch
- Rear derailleur is compatible with 10-50t and 10-52t cassettes
- The GX Eagle AXS controller offers a unique wireless shifting experience with ergonomic touchpoints that are customizable to your preferences. You can choose what each button does through the AXS App
$549.00
Reverb AXS completes the AXS ecosystem by giving the rider customizable controls, easy install, and a shared battery, charger, and controller. Built for GX, X0, and XX riders, Reverb AXS ensures smooth control and reliability for every rider running a 100mm up to a 250mm dropper post, all with improved battery clearance.
Features:
- Travel options include 100mm, 125mm, 150mm, 175mm, 200mm, 225mm, 250mm
- NEW air-over-air design that is more robust and durable
- ActiveRide provides a compliant platform for technical E-MTB climbs when not in fully extended rigid position
- Compatible with all saddle rail types (7x7, 7x9x, and 7x10)
$483.00 - $530.00
The XG-1299 cassette completes the expression of the world's most accomplished and sought after bikes. Designed for use with our proven, reliable XD driver body, this 12-speed cassette offers a massive gear range. In independent tests, the X-Dome architecture is proven to yield the strongest cassette on the market. New shifting characteristics improve both inboard and outboard shifting as well as chain retention.
- SRAM’s cassette manufacturing technology provides the greatest durability and lightest weight
- All-new shifting features create a smoother, quieter system with enhanced inboard and outboard shift performance
- XD driver body compatible
Cogs
- 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50
- 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52
$500.00
The strategic use of steel, titanium, and alloy ensures the CS-M9200 cassette is lightweight and robust enough to provide racer confidence.
New cassette cog tooth profiles improve shifting under high load while remaining smooth, fast, and durable.
- Range: 500% (9-45t); 510% (10-51t)
- Compatible with Micro Spline free hub standards
9-45 Tooth:
- Option provides maximum clearances and lightest weight
- Pairs well with Mid Cage rear derailleur and 28t or 30t chainrings
- Mounts with the use of a special lockring tool (TL-LR021)
10-51 Tooth:
- With the largest range, it is the most versatile cassette in the XTR family
- Pairs well with Long cage rear derailleur and larger chainrings
$499.99
$679.00
26% Off
The World Cup proven DHX2 is full of features, delivering ultimate performance and control when the trail gets steep. Ultra-low friction damper shaft finish provides a smooth operation and ultra-durable protection, while the Advanced RVS damping system improves damping, control and consistency with even more tunability.
Fits:
Nomad 3 (2014-2016)
High- and low-speed compression and high- and low-speed rebound adjustment
Advanced Rod Valve System (RVS) damping provides more tunability
Improved high-speed rebound tunability via addition of VVC (Variable Valve Control)
High oil flow improves damping control and consistency
X2 2-position Open/Firm lever retains high and low speed compression adjustment
Coil spring sold separately
$377.00 - $485.00
The new X01 Eagle is our best, toughest, and most aggressive Trail and Enduro crankset thanks to DUB technology. The reengineered design, employing our proprietary CARBON TUNED lay-up technology, is built tough to handle aggressive lines through rock gardens and big hits wherever you find them.
- DUB technology delivers the strongest, stiffest, lightest crankset available
- All-new SRAM CARBON TUNED crank technology provides extreme stiffness and low weight
- All-new chainring technology is designed specifically for Eagle chains and drivetrains
- The X-SYNC2 chainring provides significantly quieter performance, with better mud clearing and extraordinary durability
$475.00
Well known for its long body and flat profile, the Phenom is the shape of choice for many of the best racers in the world, ranging from Tour of Flanders winner Kasper Asgreen to World DH Champion Loic Bruni. Like every saddle we make, the S-Works Phenom with Mirror was ergonomically designed and scientifically proven - our Body Geometry methodology - combined with our Mirror 3D printing - resulting in 28% less pressure, right where it counts.
Body Geometry: We know that every body is different, but the issues facing riders in the saddle are the same — sit bone pressure, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and even penile blood flow studies (yeah, we did that), Body Geometry and Mirror Saddles don't just promise to solve these issues for men and women — we've scientifically proven they do.
SOFT TISSUE RELIEF: Using a concave shape and ultra-compliant carbon shell, we've created a space for a thicker Mirror print, using 20,055 struts and 8,735 nodes - resulting in a 28% reduction in sit bone pressure compared to a traditional foam saddle, measured by our ultra high-resolution pressure mapping.
PERFORMANCE-INSPIRED SHAPING: Being our longest and flattest saddle from tail to nose, the S-Works Phenom with Mirror's shape and construction enables maximum movement for optimal positioning for power - enabling riders to easily adjust their position on the saddle for tempo efforts and supports riders movement in and out of the saddle on climbs.
- Patented Body Geometry technology is ergonomically designed and scientifically proven to increase blood flow to sensitive arteries.
- Longest and flattest, Mirror saddle, from nose to tail to date at 27cm.
- Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort.
- Carbon fiber shell is flex-tuned for support and ride compliance.
- Ultra-light oversized carbon rails.
- SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
- NOTE: Oversized 7x9mm carbon rails are not compatible with seat posts equipped with side-load clamp mechanisms for 7mm round rails.
- Size 143mm / Weight 223g
- Size 155mm / Weight: 227g
$475.00
Extra Power, Hold the Pain
Get out of the pain cave and into your power positions with the S-Works Power EVO with Mirror, the most comfortable, high-performance saddle we’ve ever measured. Engineered for dynamic riders who move front to back, it uses Body Geometry science and elite rider insights for unrivaled comfort and performance offering 34.1% less nose pressure and 28.8% less sit bone pressure vs. foam saddles, plus 18% less midline pressure vs. Power Mirror. Power EVO supports you in every position.
At a Glance:
Use - Road, Gravel & XC Racing and Riding.
Body Geometry - Ergonomically Designed, Scientifically Proven
Comfort is a Weapon - 34.1% less nose pressure, 28.8% less at sitbones
Mirror Technology - 47,000 Struts of Adaptive Support
The Shape of Power, Evolved - Wider Nose, Invisible Cutout, Full Power
Light and Strong Carbon Shell and Rails - 212g (130mm)
$475.00
The S-works Power Saddle with Mirror technology is the perfect reflection of you.
- Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries.
- Mirror technology utilizes 3D printing from liquid polymer to create a one-of-kind
honeycomb structure that offers superior sit-bone support and comfort.
- FACT carbon fiber shell is flex-tuned for support and ride compliance.
- Ultra-light, strong, and oversized FACT carbon rails
- SWAT-compatible mounts molded into the saddle base allow for sleek and integrated
storage solutions.
- Size 143mm / Weight 190g
- Size 155mm / Weight: 194g
- NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with
side-load clamp mechanisms for 7mm round rails.
$475.00
We’re redefining comfort and performance with Mirror technology to take Body Geometry into the future. The last big material innovation in saddle design happened decades ago with the introduction of foam. To develop a next-generation saddle, we had to look beyond foam and develop a next-generation technology. The S-Works Romin EVO Saddle with Mirror is the future. We developed Mirror technology by 3D printing from liquid polymer to perfectly reflect your anatomy. This revolutionary process creates a complex honeycomb structure that allows us to infinitely tune the material’s density in a way impossible with foam. The result is a patent-pending matrix of 16,000 struts and 7,799 nodes, each of which can be tuned individually. And when you combine this technology with our extremely lightweight S-Works Romin EVO saddle, with its flex-tuned FACT carbon shell and ultra-light rails, you get a high-performance saddle that's designed to help you perform at your best. It features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort for your unique position.
- Patented Body Geometry design is lab-tested for both men and women to assure blood flow to sensitive arteries.
- Mirror technology utilizes 3D printing from liquid polymer to create a one-of-kind honeycomb structure that offers superior sit-bone support and comfort.
- FACT carbon fiber shell is flex-tuned for support and ride compliance.
- Ultra-light, strong, and oversized FACT carbon rails.
- SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.
- NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.
$462.00
SRAM's E-BLOCK shifting technology is a fundamental redevelopment of external drivetrain shifting. On the E-BLOCK cassette, the chain has a defined link position on each cog. Cog architecture has been engineered to work with both inner and outer links of the chain, which allows extremely refined shifting for both inboard and outboard shifts. The result is precise and robust shifting performance in any situation, even with full motor support.
- 11 – 48T, 8-speed cassette machined from case-hardened tool steel
- Ideal mid-ship motor gear range
- Increased chain wrap on climbing cogs
- Symmetric shifting geometry allows fast, precise gear shifts
- Optimal inboard and outboard shifting performance
- The big steps between cassette cogs is a completely new cassette technology engineered specifically for the demands of E-MTB
- Non XD driver body compatible
- Gear Ratio: 11 – 48T
- Recommended Group: EX1
- Cogs: 11, 13, 15, 18, 24, 32, 40, 48
$450.00
This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options: 0mm and 20mm.
- FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7.
- Setback: 0/20mm.
- Sleek Di2 integration hides the Di2 junction box inside.
- Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.
$450.00
This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options—0mm and 20mm.
- Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.
- FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7.
- Setback: 0/20mm.
- Sleek Di2 integration hides the Di2 junction box inside.
$440.00
The X0 Eagle T-Type 12-Speed 12-Speed cassette is a major reason why Eagle Transmission offers one of the best-ever inboard and outboard shifting performance under load. Engineered as integrated and interdependent transmission components, the X0 Eagle T-Type Tranmission Cassette and derailleur contact directly, ensuring perfect alignment on every bike. Beyond its unique and stunning Dark Polar finish and electroless nickel plating for incredible resistance to corrosion and wear, its full X-Sync design literally means the harder you pedal, the better it shifts.
$429.99
- Manufactured from UD Carbon with matte clearcoat
- Handmade in Canada
- SixC G2 Pedal Insert for increased Rally Factor
- Burlier 7050 Spindle
- Cinch technology for game-changing compatibility
$399.00
At up to 167 grams (roughly 25%) lighter than the Transfer post, the Transfer SL is the lightest mainstream dropper post on the market. The two-position design means the dropper can be ridden as either fully extended or fully retracted with size/travel options from 27.2mm x 50mm up to 31.6mm x 150mm. With lever options for both flat bars and drop bars, the Transfer SL brings simplicity and lightweight performance to Trail, XC and Gravel disciplines.
*The Transfer SL Seatpost does not include a dropper lever.
$350.00 - $390.00
Our award-winning REVIVE is also available as an oversized version for 34.9mm seattubes. Not only the lower tube diameter increased to 34.9, but also the stanchion tube grew form 25mm to 28mm. Finally there is a dropper that gives a stunning look in beefy seattubes while gaining strenght and stiffness at the same time. This is unrivaled by the competition. Optimized wall thickness and materials keep the weight extremely low and so our REVIVE MAX weighs in lower than some "regular" sized posts of the competition.
Let´s see, what´s special about our REVIVE posts:
What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers?
Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike?
BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off.
Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth, …
And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before.
To understand the benefits over other posts you have to know about the problems of many current designs first: Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced.
That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of.
The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”.
Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down.
And here is where the patented RESET VALVE comes into play:
- Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand.
- This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike.
So, now one might already understand that:
- No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings.
- No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design
- The hydraulic system can be reset to “new” via the unique “REVIVE-valving”
- This means the hydraulic circuit is a very stable closed system and basically maintenance free.
Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability:
- Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play.
- Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes.
1 set REVIVE dropper post includes:
- 1x REVIVE Seatpost
- 1x cable housing 1500mm
- 1x inner wire 1700mm
- 2x housing endcap
- 1x barrel cable clamp
- 1x air valve adapter
- 1x Quick-Reset-Lever
- 1x remote (optional)
- 1x BikeYoke I-spec adapter or Splits Clamp (optional)
- 1 set titanium saddle bolts and nuts (optional)
Page 1 of 23
Next page